How To Change Fabric On Sideout Cover Ii

Tutorial: Fabric Covered Belt

In the Colette Patterns Handbook, you'll detect the lovely Licorice dress design. It comes with a long necktie belt. For this tutorial, I'll show y'all how to make a cloth covered chugalug with a buckle to replace the tie belt. Casey wrote an excellent mail on making textile covered belts. This tutorial is showing you how to make them a piddling bit differently. Take a look at both to find the one that works for yous. If you lot have whatever belt making tips, please tell usa in the comments!

tools needed:

belting or very strong interfacing
buckle kit or buckle
fabric
paper
measuring tape

Belting material is ideal for making your own belt considering it is very stiff like a store bought belt. If you tin can't find whatever, use a thick, stiff interfacing instead. Fashion Fabrics Club sells belting by the box, just at that place's quite a bit of information technology, so maybe you and a friend could share it!

ane. With your coordinating garment on, mensurate the width of your waist or the identify where you volition vesture your belt. Add a few more inches so that it will pass through the buckle. If you lot add eyelets, you'll desire it to be longer than a short chugalug. Play with the record around your waist to find the ideal length for you. This will probably exist at least 6″ longer than your waist measurement.

2. Once yous've found the measurement you desire, cut out a piece of belting or interfacing that length. Note: measure the within of the buckle to observe the correct width. You may need to cut the belting width downwards.

3. On a slice of paper, describe the length of the belt plus 1″. Double the width of the belting and add together i one/2″ (5/viii″ seam allowance). For this belt, we multiplied three/4″ x two = 1 1/2″ and then added 1 1/2″ seam allowance = three one/ii″. Draw a iii″ width on the paper. If yous desire a smaller seam assart, go ahead and add it hither instead of 1 1/2″. Terminate drawing the chugalug blueprint piece.

4. Cutting out the textile with the piece you merely fabricated.

5. Fold the fabric in half and sew down the length of it. Annotation: if yous don't have belting and are using interfacing, cutting the interfacing equally you would belting. Earlier folding the fabric in half and sewing, fe the interfacing to the heart of the wrong side of the fabric. Your belt will be very pliable because interfacing is not as hard every bit belting.

vi. Trim and press the seam allowance flat. Make sure the seam is in the middle of the belt.

7. Sew a directly line, or curved or triangular depending upon your way idea, along one edge. Trim the seam allowance.

8. Pull to the right side.

nine. Press flat. Insert the belting. Brand sure the seam is center on the back of the belt. Information technology will take some time to push the belting through.

10. Fe the belting, making sure the seam is in the middle.

12. One time the belting is in place, it'due south time to add the buckle. If you're using a textile covered buckle kit, follow the instructions. To add the buckle, fold the extra scrap of fabric at the stop of the belt through the buckle. Pin the fabric in place.

13. With the edge folded nether, stitch in place.

belt ideas

• cut striped fabric on the bias for a fun look
• use a contrasting colors for the belting and buckle
• if your clothes is polka dot, use a opposite colored polka dot cloth for the belt
• stitch ribbon or lace to the belting fabric earlier you assemble the chugalug

Some related posts y'all may be interested in:

• Covered Belts: Be inspired by these beautiful vintage covered belts
• Thread Loops: Learn to make easy thread belt loops!
• Styling Licorice for Winter: Get a few ideas on styling your Licorice dress for winter

Source: https://blog.seamwork.com/tutorials/tutorial-fabric-covered-belt/

Posted by: swihartthits1936.blogspot.com

Share this post